How to pass Microsoft MB-330 exam with the help of dumps?

Question # 1

A company is implementing Dynamics 365 Supply Chain Management. The company frequently uses consigned inventory. The company wants to minimize entry time for the inventory. You must configure the default settings for consignment replenishment lines. Which three options can you configure? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

A. Default site 
B. Multiple order quantity 
C. Stopped 
D. Standard order quantity 
E. Default warehouse 

Show Answer

Question # 2

A company implements Dynamics 365 Supply Chain Management. The company uses the demand forecasting service to generate a statistical baseline forecast for one allocation key at a time.The process takes too long to complete. You need to ensure better performance of the service. What should you configure? 

A. Storage account name 
B. Storage account key 
C. Custom storage account 
D. Request response mode 

Show Answer

Question # 3

A manufacturing company uses 365 Supply Chain Management. The procurement manager updates the minimum stock levels by using tie safety stock journal The manager encounters a setup error while calculating the proposal tr the minimum inventory level by using the service level option You need to identify the cause of the error. What is cause of the error?

A. The Multiplication factor value was left blank 
B. The use the calculated minimum quantity the new minimum quantity option was not used. 
C. The Lead time margin was left blank
D. The Calculate standard deviation option was not used while creating the journal lines. 
E. Safety stock journal lines were created by including the current month's transactions 

Show Answer

Question # 4

A company uses the nonconformance functionality in Dynamics 365 Supply Chain Management. When a manufactured part fails a quality test, a quality clerk creates a nonconformance. You determine that additional items are needed to correct the issue. You must record the additional items for the nonconformance. What should you do?

A. Reject the nonconformance and add the items to the quality order. 
B. Reject the nonconformance and add a related operation. 
C. Approve the nonconformance and add the items to the quality order. 
D. Approve the nonconformance and add a related operation. 

Show Answer

Question # 5

A company uses Dynamics 365 Supply Chain Management. A large item fits only one item per pallet. A purchase order for the item must be a minimum of 24. Additional line quantities for the item must be in multiples of 24. An incorrect setup for the item allows entry of multiples of 50. This setup error causes purchase order entry overrides. You must configure the system to enforce a match of default quantities during setup. What should you do?

A. Select the Strict option.
B. Select the Standard option. 
C. Configure Warehouse management options. 

Show Answer

Question # 6

A company is implementing the Warehouse management module in Dynamics 365 Supply Chain Management. The company will receive an item in three units of measure (UOM): each, case, and pallet . The item must be counted from a mobile device in each UOM or case UOM only by the warehouse worker.You must configure the item. What should you configure?

A. Create a reservation hierarchy and define the rules. 
B. Set the default inventory unit of measure to each and the default purchase and sell unit to case. 
C. Create one unit sequence group and enable counting per unit of measure. 
D. Set the default inventory unit of measure to each and assign the default item set up to case. 
E. Create separate unit sequence groups, one for case counting and one for each counting. 

Show Answer

Question # 7

A company uses Dynamics 365 Supply Chain Management and has a single legal entity. The company manually creates and adds new items frequently. Many of these items require the same setup as existing items. The company requires a streamlined process to copy fields from another item upon creation and allow for other employees to use the same process. You need to configure the simplified process. What should you do?

A. Create a personalization. 
B. Release the product master. 
C. Create an item template. 
D. Create a new product master. 

Show Answer

Question # 8

A company uses Dynamics 365 Supply Chain Management. The working time template is left blank when the period template is configured.You need to determine the workdays that will be used in the inventory replenishment reporting. Which workdays will be used?

A. calendar setup on the warehouse 
B. system calendar for the country 
C. 5-day work week 
D. system date dimensions 
E. 7-day work week 

Show Answer

Question # 9

A company that uses Dynamics 365 Supply Chain Management recently became ISO 9001-certified. The company must begin documenting nonconformances. You need to configure the nonconformance functionality. Which three features must you configure? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

A. routes 
B. operations 
C. diagnostic types 
D. quality charges 
E. quarantine zones 

Show Answer

Question # 10

A manufacturer of a bill of materials (BOM) part that is used in multiple products goes out of business. The part needs to be replaced with a similar part from a different vendor. You need to identify the products that are impacted to calculate the new cost of the part. What should you use? Select only one answer. 

A. BOM calculations group 
B. Where-used report 
C. In process production costing report 
D. Calculation details for cost and price report 
E. BOM version 

Show Answer

Question # 11

A company with two legal entities uses Dynamics 365 Supply Chain Management. You are creating new products and learn that CompanyA plans to use Warehouse management (WMS) but CompanyB will not. Each storage, tracking and production dimension name and configuration must be identical in each company. You need to set up the dimensions that affect WMS for the new products. Which two actions should you perform? Each correct answer presents a complete solution

A. Assign a tracking group to the product and release it to both companies. changing one tracking group after release. 
B. Leave storage group blank on the product and assign after release to both cornpanies. 
C. Create a product master assign configuration 
D. Assign storage group to the product and release to both companies, changing one after release. 

Show Answer

Question # 12

A company is implementing Dynamics 365 Supply Chain Management in one legal entity that contains Sitel1 and Site2. ItemA is a configured item with configurations ConfigA and ConfigB. The business decides to stop buying ItemA ConfigB into Site2 but will still it at Site'. You must configure ItemA to ensure the buying rules are implemented What should you configure? 

A. Variant group 
B. Variant suggestions 
C. Default order rules 
D. Select product variants to release 

Show Answer

Question # 13

A caulking manufacturer is implementing Dynamics 365 Supply Chain Management. When caulking is produced, it is sold by tubes, 1-gallon cans, 5-gallon buckets, 55-gallon drums, or 330-gallon totes with potential to add other sizes. The manufacturer wants to ensure that when new units are added, only one conversion is set up that does not require conversions between each unit of measure. You need to configure the unit of measure to meet the requirement. What should you use?

A. Unit class 
B. Conversion formula 
C. Formula layout 
D. Base unit 

Show Answer

Question # 14

A company uses Dynamics 365 Supply Chain Management master planning. The company plans to run master planning throughout the day. Planning Optimization is not configured. The company reports that they are not able to configure any master planning features or enable master planning in Dynamics 365. You need to implement Planning Optimization What should you do first?

A. Deallocate the Current environment. 
B. Enable the Planning Optimization configuration key. 
C. Activate the Planning Optimization license. 
D. Place the environment into maintenance mode 
E. Set the value of Use Planning Optimization field to yes 

Show Answer

Question # 15

A company uses the built-in Dynamics 365 Supply Chain Management master planning engine. Planned orders are automatically firming and are firmed during the current week. You need to reconfigure the system for the new Planning Optimization master planning engine. What should you change? 

A. firming time fence to one week 
B. firming time fence to lead-time plus one week 
C. open orders' firming date to be the requirement date 
D. firming time fence to be longer than the lead time 
E. firming time fence to 0 

Show Answer

Question # 16

A company uses planning optimization in Dynamics 365 Supply Chain Management A new item is set up for production with a bill of materials (BON') and is included in planning optimization. You need to identify the planning output for the item What are two parts of the output? Each answer represents a partial solution 

A. production order 
B. action message 
C. purchase order 
D. Warning 

Show Answer

Question # 17

A retail distributor is implementing Dynamics 365 Supply Chain Management Wholesale customers receive 10 percent off list price for the current calendar year. CustomerA is a wholesaler that agreed to a pilot program for a new product. with terms to receive a discounted set price for 100 each of the products for the next six months. The distributor will charge penalties to CustomerA If the 100 each are not sold within the period You must configure pricing CustomerA. Which three configurations should you set up? Each correct answer presents part Of the solution

A. Create a trade agreement for wholesalers. 
B. Create a sales agreement with the max parameter set to yes 
C. Set the effective date on the trade agreement to begin after sales agreement. 
D. Create a sales agreement with the price and discount is fixed parameter set to yes 
E. Set the find next parameter on trade agreements. 

Show Answer

Question # 18

Note: This question is part of a series of questions that present the same scenario- Each question in the series contains a unique solution that might meet the stated goals.A company uses Dynamics 365 Supply Chain Management to item returns.You need to ensure that the original quantity and price from a sales order is used for return orders. Solution: Create a margin alert Does the solution meet the goal?  

A. Yes 
B. NO 

Show Answer

Question # 19

A company uses Dynamics 365 Supply Chain Management. The company implements master planning. The company reports delays in the supply chain that have resulted in late deliveries for products. You must simulate several broad delays across all products in the supply chain when calculating lead times. Daily planning for items must not be impacted. You need to configure the system. What should you configure? 

A. Planned orders 
B. Receipt margins 
C. Master plans 
D. Coverage groups 
E. Released products 

Show Answer

Question # 20

A company uses Dynamics 365 Supply Chain Management in one legal entity that contains one site, which contains Warehouse1 and Warehouse2. A customer routinely orders an item that the company usually stocks in Warehouse1. The customer requires the company to ship orders from Warehouse2 due to shipping cost agreements. You need to configure the system to meet the request Which configuration should you set up?

A. Set the item default order settings to Warehouse1 only. 
B. Set the customer default to Warehouse1 and set the item default order settings to Warehouse2. 
C. Set the customer default to Warehouse2 and the item default order settings to Warehouse! 
D. Set the customer default to Warehouse1 and set the item default order settings to Warehouse1 E. Set the customer default to Warehouse2 only. 

Show Answer

Question # 21

A company is implementing Dynamics 365 Supply Chain Management with batchcontrolled items. The management team wants to ensure that sales margins are calculated based on the cost of the product. Because the company values inventory using FIFO, the cost of the product fluctuates. The product is typically less expensive in the beginning of a sales cycle and becomes more expensive toward the end of the sales cycle. You must ensure that products are sold and that margins are calculated based on the cost of the inventory. You need to ensure that the correct costs are assigned. What should you configure?  

A. Run the Update expiry date job. 
B. Configure Reserve ordered items. 
C. Enable automatic reservation. 
D. Configure an item model group reservation policy. 

Show Answer

Question # 22

A company is implementing Dynamics 365 Supply Chain Management. The company manages inventory by using a just-in-time A purchase order arrives for an item. The system must allow sales order shipments of the item to posted before the purchase order invoice is received. You must ensure that the item model group configuration allows for shipment of items. Which parameter should you enable? 

A. Location profile negative inventory 
B. Financial negative inventory 
C. Physical inventory 
D. include physical value 
E. Registration requirements 

Show Answer

Question # 23

A company uses Dynamics 365 Supply Chain Management. A customer negotiated a sales price for 100 items for the next 60 days. Management reviews reports on how many items the customer has purchased at this price. The customer has an existing order for the agreed sales agreement quantity. The customer calls to add an additional quantity that exceeds the sales agreement maximum amount. The customer is not entitled to the discounted sales price outside of the agreement. You need to ensure that the customer receives the ordered amount and that the management reports are correct. Which action should you perform?

A. Modify the sales agreement quantity as unconfirmed.
 B. Edit the sales order quantity and when prompted to save changes, select Yes. 
C. Modify the sales agreement to clear the Max Enforced checkbox and do not confirm. 
D. Create a new sales order for the quantity that exceeds the sales agreement amount. 

Show Answer

Question # 24

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question In this section, you will NOT be able to return to It. As a result, these questions will not appear In the review/ screen. You are the purchasing manager at a manufacturing company that makes audio equipmentYou sign an agreement with a vendor to purchase 5,000 speaker cables. Item C0001, at a discounted rate of S3,00 per cable. This agreement expires in exactly one year. You need to set up pricing information and track the fulfillment of the agreement. Solution: Create a purchase agreement for the vendor that specifies a product quantity commitment. Include the quantity, the price, and the expiration date. Does the solution meet the goal?

A. Yes 
B. No 

Show Answer

Question # 25

A company uses Dynamics 365 Supply Chain Management. The company classifies and tracks products based on how useful they are for achieving their business goals. Certain product classifications are important in relation to inventory controls and margins. Other classifications have a small profit margin and are less important for inventory variances. The classification configuration must feed into existing classification reports and system logic. You need to configure the products for the classifications. Where should you configure the classifications?

A. Unreleased product variant 
B. Released product variant 
C. Product attributes
 D. Unreleased product 
E. Released product 

Show Answer

Question # 26

A company uses Dynamics 365 Supply Chain Management. The company provides warehouse workers with handheld devices to perform inventory operations. Periodic inventory audits are required due to the frequent theft of some inventory items from a warehouse. Some inventory has been fully depleted. On-hand inventory quantities of other items are consistently incorrect. You need to configure the system to automatically create cycle-counting work. Which two methods can you use? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point. 

A. threshold parameters 
B. work pool 
C. cycle count plan 
D. work policies 
E. inventory journals 

Show Answer

Question # 27

You need to configure the smartboards. What should you create?

A. price groups 
B. a new product master for each variation 
C. a bill of material (BOM) version
 D. D. variants by using the variant suggestions tool

Show Answer

Question # 28

You need to process the expedited photocopier replacement. What should you do?

A. Release the order to the warehouse for shipping. 
B. Create and release a load for the order. 
C. Send the shipment to the warehouse before sending it to the customer. 
D. Create an advance exchange order.

Show Answer

Question # 29

You need to configure the whiteboard paint requirements for schools. Which two settings should you configure? Each answer presents part of the solution. NOTE: Each correct selection is worth one point.

A. Quantity commitment 
B. Max is enforced 
C. Price and discount is fixed 
D. Minimum release amount 
E. Maximum release amount

Show Answer

Question # 30

You must configure pen flash sale prices. What should you configure? To answer, select the appropriate option in the answer area. NOTE: Each correct selection is worth one point.

Show Answer

Question # 31

You need to set up the manufacturer and year for the desks. What should you configure first?

A. attribute type 
B. variant 
C. friendly name 
D. item type 
E. attribute definition 

Show Answer

Question # 32

You need to configure the system to identify the complaints for the chalk and blackboard items. Which two settings should you configure? Each answer presents part of the solution. NOTE: Each correct selection is worth one point. 

A. Quarantine zone 
B. Item sampling 
C. Quality orders 
D. Inventory status 

Show Answer

Question # 33

You need to provide the information for the costing manager. What should you do first?

A. Check cost prices. 
B. Check for open quantities. 
C. Close and adjust cancellation. 
D. View close settlements. 

Show Answer

Question # 34

You need to configure automated testing for the following tasks: • inbound processes from manufacturing • outbound processed from the warehouse picking process How many processes should you configure? 

A. 2 
B. 3 
C. 4 
D. 10 

Show Answer

Question # 35

You need to configure the system to automatically enforce inbound and outbound product requirements to and from the warehouse. Which feature should you use?

A. quality associations 
B. quality orders 
C. C. quarantine zones 
D. quality tests 
E. nonconformances 

Show Answer

Question # 36

You need to define the number of quarantine zones. How many should you define? 

A. 1 
B. 2 
C. 4 
D. 6 
E. 8

Show Answer

Question # 37

Trey Research is now live on Dynamics 365 Supply Chain Management. You need to apply the new cost model for the apparel items. What should you do?

A. Run Inventory close. 
B. Close all production orders. 
C. Configure Backflush costing. 
D. Run a BOM calculation. 

Show Answer

Question # 38

You need to configure the system for the customer tier B pricing. What should you do?

A. Configure an item sales control for the item.
 B. Enable the customer group in the Activate price/discount form. 
C. Assign the product filter code for the item to the customer tier B customer group. 
D. Assign the item to the customer tier B price group. 
E. Approve and confirm the trade allowance agreement.

Show Answer

Question # 39

A retailer that uses Dynamics 365 Supply Chain Management is conducting master planning runs with 300,000 items in a single planned order run on average. Optimizations are needed to improve performance. Most of the items in the master planning runs do not have dependencies on the other items. Planning multiple items together in a single group will help with performance. You need to configure the system to increase performance. Which configuration should you use?

A. Number of tasks in a helper bundle 
B. Number of threads 
C. Use of cache 
D. Time fences 
E. Number of orders in a firming bundle 

Show Answer

Question # 40

A company decides to implement Planning Optimization. Company auditors need to know where the service will run physically once it is enabled for Dynamics 365 Supply Chain Management. In which location will the service run? Select only one answer.

A. on-premises at the company
B. on the same SQL server as the Dynamics 365 Supply Chain Management instance 
C. in any data center, regardless of where the Dynamics 365 Supply Chain Management instance exists 
D. in the same data center country or region as the Dynamics 365 Supply Chain Management instance 
E. in the Microsoft Dataverse 

Show Answer

Question # 41

A company uses planning optimization in Dynamics 365 Supply Chain Management. Automatic firming is enabled. Some of the planned purchase orders are not being firmed as expected. The inventory planners therefore need to manually process planned purchase orders. You need to include the planned purchase orders in automatic firming. What are two possible configurations you can use? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

A. Lead Time 
B. Automatic firming time fence (days) 
C. Requirements Date 
D. Freeze time fence on master plan 

Show Answer

Question # 42

You are setting up safety margins. Which unit of measure is used to represent safety margins in planning optimization calculations? Select only one answer.

 A. Period
 B. Month 
C. Week 
D. Day 

Show Answer

Question # 43

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. A company uses Dynamics 365 Supply Chain Management to manage inventory. Backorders exist on customer sales orders because incorrect data was given on product quantities. Users need to look up what quantity can be sold and when more product will arrive. Solution: Total Available shows what is available for sale at that point in time. Does the solution meet the goal?

A. Yes 
B. No 

Show Answer

Question # 44

A company enables purchase trade agreements for Planning Optimization. You need to be able to evaluate purchase trade agreements. Which three configurations must be set up? Each correct answer presents part of the solution. Select all answers that apply.

A. Find trade agreement 
B. Search criterion 
C. Agreements marked as effective 
D. Purchase agreements with status of confirmed 
E. Activate price/discount 

Show Answer

Question # 45

A company classifies items as A, B, C, and D for planning purposes. You run Planning Optimization for the C items with the following setup: • a plan filter for the A, B, and D items • a runtime filter for the C items The Planning Optimization output does not create any planned orders. You need to produce results in Planning Optimization for the C items without affecting the A, B, and D items. What should you do? Select only one answer.

A. Add the C items to the existing plan filter for the A, B, and D items. Set up a runtime filter for the A, B, and D items. 
B. Create a master plan with plan filter for the C items only. Do not set up a runtime filter for C items. 
C. Create a master plan with no plan filter or runtime filter. Add an advanced filter for the C items on the planned orders. 
D. Create a dynamic plan and a static plan. Do not set up plan filters or runtime filters. 
E. Retain the existing plan filter for the A, B, and D items. Set up a runtime filter for the A and C items. 

Show Answer

Question # 46

A buyer reviews the orders generated by Planning Optimization. The buyer observes that the output for some orders appears incorrect. The buyer reviews the history and planning logs. Which two types of information are in the history and planning logs? Each correct answer presents part of the solution.  Select all answers that apply. 

A. list of planned orders created 
B. start time a job was run and the status 
C. additional information and warnings 
D. end time a job stopped and the status 
E. list of planned orders with firm history 

Show Answer

Question # 47

A company produces finished goods that consist of some raw material items that are purchased and some raw material items that are produced. The costs of some of the produced materials that are used in the sub-BOMs are updated. The costs of the purchased raw materials do not change. You need to ensure that the updated costs are reflected in the finished goods planned costs. You do not need to recalculate the purchased raw materials. Which explosion mode should you use in the bill of materials (BOM) calculation? Select only one answer.

A. Multilevel 
B. Make to order 
C. Single level 
D. According to BOM line type 

Show Answer

Question # 48

A company uses Planning Optimization as a scheduled batch job every Friday. A buyer observes that there are unposted inventory cycle counts left over from a weekend physical inventory count. The buyer decides to cancel the Planning Optimization job, post the cycle counts, and run the job again. Where should the buyer cancel the job?

 A. Recurring integration scheduler (RIS) 
B. Batch group 
C. Feature management 
D. Job history 
E. Lifecycle Services (LCS) 

Show Answer

Question # 49

A manufacturing company produces finished goods that contain raw materials that are costed using first-in, You need to set up a costing version to support planned costs of the finished goods. What should you configure in the costing version? Select only one answer.

A. costing type to standard and block activation to yes 
B. costing type to planned and block activation to yes 
C. costing type to planned and block activation to no 
D. costing type to standard and block activation to no 

Show Answer

Question # 50

You are the warehouse manager at a large distribution company and are responsible for all outbound processing. You decide to implement cluster picking functionality to more efficiently aid in picking. When warehouse workers log in to the mobile device to process a cluster pick, the work items are not assigned to positions as expected. You need to validate the cluster picking setup . Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point. 

A. Review the Sales order Work template. 
B. Validate the Cluster profile's positions and sorting setup. 
C. Validate whether there is a Cluster profile selected on the Mobile device menu item. 
D. Review the Location directive for sales picking. 

Show Answer

Question # 51

A company uses Planning Optimization. The company decides to set up purchase trade agreements. What should you verify in Supply forecast to ensure that purchase trade agreements are used? Select only one answer.

A. Reduction keys are removed. 
B. The vendor is not specified on any of the rows 
C. The vendor account is specified on the rows 
D. The forecast model is cleared 
E. The forecast time period is cleared. 

Show Answer

Question # 52

You are implementing Dynamics 365 Supply Chain Management for a company that uses bill of materials (BOM) templates to expedite setup in the system. A line must be removed from the BOM, but the system does not allow this. You need to determine why you are unable to perform this deletion. Why are you unable to delete the line? 

A. The BOM template version has already been saved. 
B. The local version of the BOM template has been associated to a service object. 
C. The local version of the BOM template has been modified. 
D. The BOM template has been associated to a service object. 

Show Answer

Question # 53

A company allows negative inventory because they ship outbound orders before receipts are processed for items. On-hand inventory for an item has the following setup: • Coverage planning for site, warehouse, and location • Location A = 10 on hand • Location B = -11 on hand • Minimum quantity = 20 • Maximum quantity = 30 Which quantity will be reordered when Planning Optimization is run? Select only one answer. 

A. 20 
B. 29 
C. 30 
D. 31 
E. 40 

Show Answer

Question # 54

You run Planning Optimization. You create a static master plan with a plan filter for A and B items. Purchasing agents for the A items start to review the A item output. You must re-run planning for the B items due to a change. Re-running the B items must not impact the existing planned orders for the A items. You need to re-run planning for the B items. What are two possible ways to achieve this goal? Each correct answer presents a complete solution. Select all answers that apply. 

A. Re-run the static plan with the runtime filter set for the A items. 
B. Delete the planned orders for the B items and re-run the static plan.
C. Run a dynamic plan with a plan filter for the B items. 
D. Run a dynamic plan with a plan filter for the A items. 
E. Re-run the static plan with the runtime filter set for the B items. 

Show Answer

Question # 55

You are the warehouse manager at a distribution center. In the warehouse, items must be moved to a staging location before moving to the baydoor location for shipping. You need to set up a work template that accomplishes this pick/put scenario. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

A. Create one work class ID with valid location types of staging and baydoor. Assign these to the work template details. 
B. Create two work templates: one is a pick/put from inventory to staging and the other is from staging to baydoor. 
C. Create a sales order work template with two pick/put pairs: one to staging and the second to baydoor. 
D. Create two work class IDs: one with valid put location types of staging and the other of baydoor. Assign these to the appropriate put work types on the work template. 

Show Answer

Question # 56

A company is considering using Planning Optimization instead of Master Planning. What are two architectural benefits when using Planning Optimization? Each correct answer presents a complete solution. Select all answers that apply. 

A. occurs inside Dynamics 365 Supply Chain Management 
B. reduces the load on Azure Data Lake 
C. has minimal impact on the SQL database 
D. minimizes server load 
E. allows for BYOD (Bring your own database) 

Show Answer

Question # 57

A company uses Dynamics 365 Supply Chain Management. Products are being added to purchase orders for the incorrect vendors. You need to restrict which products can be purchased from specific vendors. Which two features should you use? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point. 

A. Approved vendor list 
B. Item group 
C. Vendor group 
D. Vendor external item 
E. Item model group 

Show Answer

Question # 58

A company uses Planning Optimization. A customer calls a service agent at the company and asks about product availability dates when placing an order. Capable to promise (CTP) is initiated from the customer’s order. What is the expected output? Select only one answer. 

A. An error occurs because CTP is not supported when Planning Optimization is enabled. 
B. Built-in master planning runs the calculation if the master plan has a separate dynamic master plan specified. 
C. A warning shows in the plan history log. 
D. CTP runs if add-ins are installed from Feature management. 
E. CTP calculates if all Planning Optimization jobs are withheld from batch scheduling. 

Show Answer

Question # 59

A company discovers that planned costs are being calculated incorrectly due to missing configurations. You need to configure the system to prevent calculation of the planned cost for items that are missing the following: • a valid bill of materials (BOM) version • a valid cost price In which two locations can you configure the validation? Select all answers that apply.

A. Product information management parameters 
B. Inventory and warehouse management parameters 
C. Released products 
D. Calculation groups 
E. BOM version 

Show Answer

Question # 60

A company plans to use the Planning Optimization add-in. How is data communicated to Planning Optimization? Select only one answer. 

A. through a connector 
B. through an automated entity store refresh 
C. with Business process modeler 
D. mapped between solutions 
E. with Microsoft Dataverse 

Show Answer

Question # 61

A company uses Dynamics 365 Supply Chain Management. Products must automatically be classified based on the company’s objectives and priorities. You need to create the ABC model. Which three ABC codes should you configure? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

A. Margin 
B. Cost 
C. Revenue 
D. Profit 
E. Value 

Show Answer

Question # 62

A company uses the built-in master planning engine but plans to use Planning Optimization instead. You enable auto-firming. You need to ensure that planned orders are firmed within the current month. What should you do? 

A. Set the firming time fence to one month plus issue margin. 
B. Set the firming time fence to one month plus receipt margin 
C. Set the firming time fence to one month plus lead lime rf the lead time is greater than one week. 
D. Set the firming time fence to one month 
E. Set the firming time fence to one week plus lead time if the lead time is less than one week. 

Show Answer

Question # 63

A manufacturer of a bill of materials (BOM) part that is used in multiple products goes out of business. The part needs to be replaced with a similar part from a different vendor. You need to identify the products that are impacted to calculate the new cost of the part. What should you use? Select only one answer

A. BOM calculations group 
B. Where-used report 
C. In process production costing report 
D. Calculation details for cost and price report 
E. BOM version 

Show Answer

Question # 64

A buying agent is evaluating vendors for sourcing an item. Prices and lead times vary by vendor. The buyer requires that the planning engine be set up to provide the best price while considering the lead time. Manual correction must not be required after planned purchase orders have been created. Which two actions should you perform to meet the requirements? Each correct answer presents part of the solution. Select all answers that apply. 

A. Use Planning Optimization. 
B. Use built-in master planning. 
C. Set Purchase trade agreements. 
D. Set the default vendor on the item. 
E. Set the override lead times on the item to yes. 

Show Answer

Question # 65

A company requires that a percentage of the building overhead costs as well as a percentage of overall labor must be added to a costing sheet for each item. The company also requires that the labor and overhead costs be calculated independently and then rolled up to a total amount. Which three actions should you perform to meet the requirements? Select all answers that apply. 

A. Select Cost group type as a node.
 B. Create indirect cost subnodes. 
C. Define the costing sheet format. 
D. Define the rate amount on the node. 
E. Define the rate amount on the cost group. 

Show Answer

Question # 66

A manufacturing company uses Planning Optimization. Manned production orders are created, modified, and approved by the planner but are not yet firmed. What is the effect on the planned production orders when you enable the Planning Optimization feature? 

A. Modifications are ignored when Planning Optimization is run again. 
B. Modifications are included when Planning Optimization is run again. 
C. Approved orders are automatically firmed. 
D. Approved orders are set to unprocessed. 
E. Approved orders are set to completed. 

Show Answer

Question # 67

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. A company is implementing inventory management in Dynamics 365 Supply Chain Management. The company needs to block inventory and ensure that physical inventory will not be reserved by other outbound transactions. You need to select the appropriate option to block the inventory in the system. Solution: Configure a blocking cause in the inventory setup configuration. Does the solution meet the goal?

A. Yes 
B. No 

Show Answer

Question # 68

A company discovers that the standard cost of a raw material is incorrect. You need to determine the impact of the incorrect cost on finished goods that contain the raw material. Which two actions should you perform?

A. Activate the new standard cost of the raw material. 
B. Set the fallback principle to Costing version. 
C. Create a new pending cost for the raw material. 
D. Set the fallback principle to Active. 
E. Set the fallback principle to None.

Show Answer

Question # 69

A company is evaluating sales pricing strategies in a costing version of a bill of materials (BOM) product that will use a cost-plus-markup strategy. You need to configure the system to provide three prices based on different profit models. Where should you configure the markup values? Select only one answer. 

A. Released product 
B. Inventory model group 
C. BOM calculation group 
D. BOM version 
E. Cost group 

Show Answer

Question # 70

A company uses Dynamics 365 Supply Chain Management. The company does not use variants and sells items only out of a single legal entity. You need to configure the system to avoid unnecessary product creation overhead. What should you do?

A. Create a released product master 
B. Create a personal template for unreleased products 
C. Create a released product 
D. Create an unreleased product and release the product 
E. Create a shared template for unreleased products 

Show Answer

Question # 71

A company plans to create a product that contains multiple bill of materials (BOM) levels. The product has several components that have both constant and variable costs. You need to calculate the planned cost for producing the product with manufacturing volumes. Which explosion mode should you select? Select only one answer.

A. Multilevel 
B. Make to order 
C. Single level 
D. According to BOM line type 

Show Answer

Question # 72

A company performs internal inspections of a specific product before releasing the products. This task adds two days for product handling once the product is in the warehouse. This process leads to delays in shipping. You need to resolve the issues. What should you change? . 

A. Reorder margin 
B. Minimum order quantity 
C. Receipt margin 
D. Maximum order quantity 
E. Issue margin 

Show Answer

Question # 73

A company uses Dynamics 365 Supply Chain Management. Inventory value is standard and updated only once per year. The company wants to convert costing from standard to moving average. You need to convert the items from standard to moving average. Which three actions must you perform? Each answer presents a partial solution. NOTE: Each correct selection is worth one point.

A. Change the Item Group 
B. Adjust the inventory quantity to zero 
C. Adjust the inventory cost to zero 
D. Run inventory close 
E. Change the Item Model Group 

Show Answer

Question # 74

A company uses Planning Optimization and first in, first out (FIFO) inventory valuation. The company also has special requirements on sales margins. Company policy states that marking must be a single issue that is fully marked against a single receipt, regardless of quantity. What should you do to respect marking when planned orders are being firmed? Select only one answer. 

A. Allow negative inventory. 
B. Enable Ordered Reserved. 
C. Set the Update marking parameter to Extended. 
D. Set the Update marking parameter to Standard. 
E. Set the Update marking parameter to No. 

Show Answer